top of page

EDGE BANDING MACHINE

AUTO EDGE BANDING MACHINE

AUTO EDGE BANDING MACHINE

MODEL:

  • AEB-950SF

EXAMPLE

PRE-MILLING UNIT

 

  • Apply moulding on panel edge or lipping.

  • Standand with h.f. motors.

  • Spindle tiltable: 0°~180°

  • Cutter: 80×20 mm / 120×30 mm

  • Speed: 12000 (50hz) / 14400 (60hz) r.p.m.

  • Motor: 1.8hp

  • Space required: 570 mm

GLUING UNIT

 

  • With the use of hot melt glue applied on straight panel for edge banding.

  • This unit consist of 4kgs glue pot with 4.5kw powerspace required: 450 mm

SIDE PRESSURE UNIT

 

  • Standard with one row of vertical rollers for straight edges.

  • Space required: 460 mm

END CUTTING UNIT

 

  • Application for cutting front & rear edge by two independent motors 0.5 hp run at 14400 r.p.m (240hz) with sawblade 150×20 mm

  • The spindle is orientable from 0°~15°space required: 800 mm

EDGE TRIMMING UNIT

 

  • Apply for rough trimming of top and bottom edges.

  • Cutters: 80×20 mm / 100×20 mm

  • Speed: 14400(240hz) r.p.m.

  • Motor: 0.5hp×2 / 1.8hp×2 / 2.5hp×2

  • Space required: 320 mm

TILTING EDGE TRIMMING UNIT

 

  1. This top and bottom trimming unit is complete with tow independent motors of 0.5 / 1.8hp which run at 14400 r.p.m.(240hz) with cutter 65×20 mm, motors are tiltable from 0°~35°

  2. Space required: 390 mm

RADIUS TRIMMING UNIT

 

  • Apply for perfect finishing of the bottom of front and rear corner of the profile edge.

  • Motor: 0.5hp×2pcs

  • Speed: 14400 r.p.m.

  • Cutter: 60×60 mm

  • Space required: 620 mm

RADIUS TRIMMING UNIT

 

  • Apply for perfect finishing of top of front and rear corner of the profile edge.

  • Motor: 0.5hp×2pcs

  • Speed: 14400 r.p.m.

  • Cutter: 60×16 mm

  • Space required: 830 mm

SCRAPPING UNIT

 

APPLY FOR SCRAPPING TOP AND BOTTOM CORNERS OF PVC / ABS SPINDLE FIXED AT 45°

REDIUS REQUIRED: R3-R5

SPACE REQUIRED: 300 MM

EDGE SANDING UNIT

 

  • Edge sanding unit

  • Apply for prfile sanding of streight line panel.

  • Speed: 1720 r.p.m.

  • Motor: 1 hp×1​

BRUSING UNIT

 

  • Apply the finest surfacing process on top and bottom edge.

  • Brushing wheel: 180×25 mm

  • Speed wheel: 1720 r.p.m.

  • Motor wheel: 0.25 hp

  • Space required: 450 mm

  • The top pressure beam equipped with ball screw transmission

  • Limit switch for controlling distance between panels

  • Feed back device for thin edge in coil

  • Extension side support

  • Aluminum extension side support

STANDARD ATTACHMENT 

 

  • Double roller side support, 1.6 m opening.

  • Digital readout device for adjustment of top pressure beam

  • 1 set of tool box

  • 1 set of operation manual

SPECIFICATION

FULPOW INDUSTRIAL CORP.,

Address：

7F-2, NO. 400, Sec. 1,Chang Ping Road,

Taichung 40652,Taiwan
TEL : +886 4 22439235

FAX : +886 4 22443829

E-Mail：fulpow@ms7.hinet.net

bottom of page